Plus RS-232 User Manual download pdf (Page 7)

Publication 2711-IN032C-EN-P

Remote RS-232 Port Assembly 3

Tools Required

• No. 2 Phillips Screwdriver

• Drill

• Jig saw

• Torque wrench adjustable to 1.36 N•m (12 in-lb)

Installing the Remote

RS-232 Port Assembly

1. Make a cutout in the panel door and drill four mounting holes.

Remove any burrs on the holes.

2. From the rear of the panel, install the remote serial port

assembly in the cutout.

3. Use the washers provided between the screw heads and the

front of the panel. Orient the narrow end of the washer towards

the head of the screw as shown on page 1.

4. Fasten the housing to the panel with the four mounting screws

provided. Thread one of the screws through the chain for the

protective cap. The chain should be attached to the lower left

corner. Tighten screws to 1.02-1.36 N•m (9-12 in-lb).

66.7 mm

2.625 in.

66.7 mm

2.625 in.

4.76 mm

3/16 in.

4 Places

dia. 76.2 mm

+ 0.05 -0.00

dia. 3.00 in.

+ 0.025 -0.000

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Plus RS-232 User Manual Page 7