Plus UP-1100 User Manual download pdf (Page 29)

E – 28

Setting in Accordance With

Image Contents (continued)

Initial Settings

Setting Keystone

This is used to set the height for keystone adjustment.

1 With the FLIP COVER of the remote con-

trol open, press the MENU button to dis-

play the Advanced menu, then use the

cursor

䊴

䊳

keys to select “VIEW”.

2 Display the frame, then use the cursor /

keys to select “KEYSTONE”.

3 Use the cursor

䊴

䊳

keys to select “NOR-

MAL” or “FULL”.

●Normal: normal keystone correction

●Full: In this mode, the image is enlarged to fill

the screen vertically and then Keystone correc-

tion is performed.

Setting the partial display position

Input a signal that is rated SXGA (XGA for the U3-810SF/

U3-810Z) to RGB/YCbCr connector and then set the partial

display position with ASPECT (described later) set to Real.

1 With the FLIP COVER of the remote con-

trol open, press the MENU button to dis-

play the Advanced menu, then use the

cursor

䊴

䊳

keys to select “VIEW”.

2 Display the frame, use the cursor /

keys to select “PAN” and then press the

ENTER button.

3 Use the cursor / ,

䊴

䊳

keys to set the

display position.

Audio Muting

Audio only can be muted for each input.

This function is convenient when multiple video units are

connected to this projector.

1 Select the input to be muted (page 16).

2 With the FLIP COVER of the remote con-

trol open, press the MENU button to dis-

play the Advanced menu, then use the

cursor

䊴

䊳

keys to select “SETUP”.

3 Use the cursor / keys to select

“SOUND MUTE”, then use the cursor

䊴

䊳

keys to set muting to ON or OFF.

Selecting the Background

Two different backgrounds can be selected for projection

when there is no signal input.

1 With the FLIP COVER of the remote con-

trol open, press the MENU button to dis-

play the Advanced menu, then use the

cursor

䊴

䊳

keys to select “SETUP”.

2 Use the cursor / keys to select

“BACKGROUND”.

3 Use the cursor

䊴

䊳

keys to select one of

the following backgrounds.

● Blue ● Black

Auto Gain

Brightness and contrast are adjusted automatically.

1 Select the input to be set for auto gain

(page 16).

2 With the FLIP COVER of the remote con-

trol open, press the MENU button to dis-

play the Advanced menu, then use the

cursor

䊴

䊳

keys to select “SETUP”.

3 Use the cursor / key to select “AUTO

GAIN”, then use the cursor

䊴

䊳

keys to

set ON or OFF.

To select other menu names

Press the MENU button. The cursor will disappear and the menu

selection screen will be displayed.

To close the menu

Press the CANCEL button.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments

Plus UP-1100 User Manual Page 29

Comments to this Manuals

Related products and manuals for Projectors Plus UP-1100